GE GE1100P DVD Player User Manual


 
12
DVD Player + TV + Dolby Digital
Receiver
(Best Picture and Sound Quality)
To Connect the DVD Player
1. Connect the left and right A/V cables to the Dolby Digital
receiver,
Or
Connect an optical cable to the DIGITAL OUT jack on the
DVD player and to the digital input on a Dolby Digital
receiver.
2. Connect the video cable (or the S-Video cable if your
television has an S-Video input).
Dolby Digital
This format is used when 5.1-channel audio signals are recorded
onto the digital track of film. It provides 5 separate (discrete)
channels: left, right, center, left rear, right rear, and common
subwoofer.
To Watch DVD
Tune your television to either the Video or S-Video input channel
for the video output. Use your Dolby Digital receiver for audio
output.
LEFT
RIGHT
DIGITAL
DOLBY
DIGITAL
RECEIVER
R
VIDEO
AUDIO
L
S-VIDEO
L R
VIDEO
AUDIO
ANT IN
S-VIDEO
TV
DVD
PLAYER
OR
CABLE
OR
OFF-AIR SIGNAL
DIGITAL
OUT
OR
CAUTION
Do not stack electronic components
or other objects on top of the DVD
player. See Safety Information, inside
front cover.
CONNECTIONS
Consult the owner’s manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.
PLEASE READ BEFORE USING
THE DIGITAL OUT JACK!
This player’s Digital Output jack fully
complies with the international
standard governing this type of jack
(IEC 958), and is designed for
connection to a Dolby Digital (AC-3)
receiver or Dolby Digital (AC-3)
decoder.
DO NOT use the Digital Output jack
to connect to equipment other than a
Dolby Digital (AC-3) receiver or Dolby
Digital (AC-3) decoder. Such a
connection can create a high level of
noise that may be harmful to your
ears, and could damage headphones
or speakers.
Older digital equipment, some of
which is not fully compliant with IEC
958, is likely to cause this problem.