Filter
Top Products
7
A Few Things You should Know
Before you connect your DVD player, there are a few
things that you need to know.
Protect Your Components from Power Surges
• Connect all components before plugging any
power cords into the wall outlet.
• Always turn off the DVD player, TV and other
components before you connect or disconnect any
cables.
Position Cables Correctly to Avoid Audio Hum or
Interference
• Insert all cable plugs firmly into their jacks.
• Place the audio/video cables to the sides of the
TV’s back panel instead of straight down the
middle after you connect your components.
• Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.
• Make sure all antennas and cables are properly
grounded.
Protect Your Components from Overheating
• Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.
• Do not stack components.
• Allow adequate ventilation when placing your
components in a stand.
CAUTION
Do not stack electronic components
or other objects on top of the DVD
player. See Safety Information, inside
front cover.
CONNECTIONS