Filter
Top Products
48 Graphics contained within this publication are for representation only. Your unit might differ slightly.
Troubleshooting
Player won’t work
•Unplug the AC power cord and plug it back in.
No power
• Plug in the DVD Player. Make sure both ends of the AC power cord are securely plugged into the player and into an AC outlet.
Disc won’t play
• Insert a disc with the label side facing up.
• Check the type of disc you put into the player. This player only plays DVD video discs, Video CDs and audio CDs.
• Both the player and the disc are coded by region. If the regional codes don’t match, the disc cannot be played. This player is Region No. 1.
Play starts, but then stops immediately
• The disc is dirty. Clean it.
• Condensation has formed. Allow player to dry out.
No picture
• Turn your TV to its Video Input Channel (go to page 59).
• Turn on the TV.
• Make sure your player is connected properly.
No sound or distorted sound
• Make sure your player is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
• You may need to readjust the Digital Output setting (from the Sound menu). Go to page 42.
• Turn your TV to its Video Input Channel (go to page 59).
• Sound is muted when you’re using search features (fast forward, reverse, frame advance, etc.).
IB/100N/GE/4_9 4/12/02 10:17 AM Page 48