Filter
Top Products
Chapter 1: Setup and Connections
4 Graphics contained within this publication are for representation only. Your unit might differ slightly.
R
L
AUDIO
OUT
VIDEO
AUDIO
L R
S-VIDEO
CABLE/ANTENNA
Back of TV (example)
Back of DVD Player
VIDEO
AUDIO
L R
OUT TO TV
Back of VCR (example)
CABLE
OR
OFF-AIR SIGNAL
IN FROM ANTENNA
VIDEO
OUT
S-VIDEO
DIGITAL AUDIO OUT
Connection: TV + DVD + VCR
1. Connect the audio cables to the AUDIO OUT L (left – white) and R
(right – red) jacks on the back of your DVD Player, and to the
corresponding Audio Input jacks on your TV (sometimes labeled
AUDIO IN L and R).
2. Connect the video cable.
a. Basic video connection – Connect the video cable (yellow) to the
VIDEO OUT jack on the back of your DVD Player, and to the Video
Input jack on your TV (sometimes labeled VIDEO IN).
b. S-Video (optional) – If your TV has an S-Video jack, connect the
S-Video cable (not provided) to the S-VIDEO OUT jack on the back
of your DVD Player and to the S-VIDEO jack on your TV.
3. Connect the antenna or cable to the Antenna Input jack on the VCR
(sometimes labeled IN FROM ANTENNA).
4. Connect a coaxial cable to the Antenna Output jack on the VCR
(OUT TO TV) and to the Antenna Input jack (CABLE/ANTENNA)
on the TV.
5. Insert the AC power cord into an AC outlet.
Go to page 8
The back of your TV and VCR might look differently than
the ones pictured here.
Note: Don’t connect the DVD player to the VCR, or through the
VCR. Doing so could negatively affect the picture quality and/or
disable the DVD player.
1
2a
2b
– or –
3
4
4
IB/100N/GE/4_9 4/12/02 10:17 AM Page 4