GE DGE100N DVD Player User Manual


 
Chapter 1: Setup and Connections
Connection: TV + DVD
1. Connect the audio cables to the AUDIO OUT L (left
– white) and R (right – red) jacks on the back of your
DVD Player, and to the corresponding Audio Input
jacks on your TV (sometimes labeled AUDIO IN L
and R).
2. Connect the video cable.
a. Basic video connection – Connect the video cable
(yellow) to the VIDEO OUT jack on the back of your
DVD Player, and to the Video Input jack on your TV
(sometimes labeled VIDEO IN).
b. S-Video (optional) – If your TV has an S-Video
jack, connect the S-Video cable (not provided) to the
S-VIDEO OUT jack on the back of your DVD Player
and to the S-VIDEO jack on your TV.
3. Connect the AC power cord into an AC outlet.
4. Connect your cable or off-air antenna to your
television as you normally would. You may need to
consult your television manual for details.
Go to page 8
R
L
AUDIO
OUT
VIDEO
AUDIO
L R
S-VIDEO
CABLE/ANTENNA
Back of TV (example)
Back of DVD Player
CABLE
OR
OFF-AIR SIGNAL
VIDEO
OUT
S-VIDEO
DIGITAL AUDIO OUT
The back of your TV might look differently
than the TV pictured here.
1
2a
2b
or
4
Graphics contained within this publication are for representation only. Your unit might differ slightly. 9
IB/100N/GE/4_9 4/12/02 10:17 AM Page 5