Filter
Top Products
Other Information
46 Chapter 5
Back Panel
ANT. IN jack Receives a signal from an antenna or cable system when the VCR is attached with
RF cables.
AUDIO (R /L) and VIDEO Input Jacks Receives signals from another component, such as a VCR
or camcorder, when connected to these jacks. Use the INPUT button on the VCR or remote
control to select the video line input (L1) and record from these jacks.
AUDIO (R and L) and VIDEO Output Jacks Sends signals from the VCR to another component,
like a TV or VCR, when the other component is connected to these jacks.
CH. 3/4 Switch Determines the channel to which the TV must be tuned in order to see the
VCR’s picture. Not used when connecting the VCR to the TV using Audio/Video cables.
RF OUT jack Passes signal to TV using the supplied RF cable.
ANT. IN
RF OUT
CH.
VIDEO
AUDIO
OUT
IN
R
L
3 4