Filter
Top Products
GE Energy Services
Protocol X DCA
Configuration Guide
A197-0CG-1.00-2 Restricted
22
Full
F102: Unable to open a channel to WIN
Cause:
• The DCA was unable to initiate communications with WIN.
Remedy:
• Contact the Customer Service Department and report this error.
F103: Unable to create an exchange, <name>, status=<y>
Cause:
• The system was unable to create a specified message exchange. This message exchange is
vital to the operation of the entire application.
Remedy:
• Contact the Customer Service Department and report this error.
F104: Unable to spawn process, <process_name>
Cause:
• The system was unable to start specified process. The process is vital to the operation of the
entire application.
Remedy:
• Contact the Customer Service Department and report this error.
F105: Not enough memory!!!
Cause:
• The DCA was unable to allocate enough memory to start the ANSI X3.28 DCA.
Remedy:
• Reduce the amount of memory used by this or other applications in the system.
• Contact the Customer Service Department and report this error.
F106: Missing Callout, <callout>
Cause:
• The DCA was unable to locate a callout function <callout>.
Remedy:
• Contact the Customer Service Department and report this error.