Filter
Top Products
Protocol X DCA
Configuration Guide
GE Energy Services
Restricted A197-0CG-1.00-2
Full
23
F107: Unable to get pointer <table name>
Cause:
• The DCA was unable to get a pointer to a configuration table <table name>. The
configuration table <x> is vital to the operation of the entire application.
Remedy:
• Contact the Customer Service Department and report this error.
F108: Not enough<x> points, <y> required
Cause:
• There are not enough WESDAC data points allocated to the ANSI X3.28 DCA.
Remedy:
• Ensure the DCA Index configured in A197MAIN refers to the correct WIN CFG_DCA
record.
• Refer to Table 12 WESDAC Point Types and ensure the required number of data points are
allocated for the ANSI X3.28 DCA in the appropriate WIN System Point Database record.
The WESDAC point types are described in the following table.
WESDAC Name Point Type
WESDAC_1 Digital Inputs
WESDAC_2 Digital Outputs
WESDAC_3 Counter
WESDAC_4 Analog Inputs
WESDAC_5 Analog Outputs
WESDAC_6 Devices
Table 12 WESDAC Point Types
F109: User data memory overflow
Cause:
• There has been a memory overflow in the application’s user memory.
Remedy:
• Contact the Customer Service Department and report this error.