Filter
Top Products
GE Energy Services
Protocol X DCA
Configuration Guide
A197-0CG-1.00-2 Restricted
28
Full
A.3 Warning Messages
Warning messages indicate recoverable run-time errors, either within the application or through
one of the software interfaces. The application will attempt to handle these errors without
suspending or jeopardizing the integrity of the system. If a warning message occurs repeatedly,
contact the Customer Service Department to report the error.
W001: win_write failed, status = <x>
W101: send_x failed, status = <x>
W102: send_x failing, status = <x>
W103: win_write failing, status = <x>
failure condition cleared
W201: Tx Failed, <x> reset - Check Cabling
W202: Error getting a communication buffer"
W203: send_x failing, status = <x>
A.4 Information Messages
Information messages indicate the application is taking some special action based on certain
configuration or initialization criteria.
I101: Unable to find table A197MAIN, deleting
Cause:
• The DCA could not find the Main Application configuration table. If the Main Application
configuration cannot be located, the application assumes the user does not want it to run.
Effect:
• The ANSI X3.28 DCA will delete itself from the system.
Remedy:
• If the ANSI X3.28 DCA is intended to run, ensure the Main Application configuration table,
A197MAIN, exists and is comprised of at least a single record.