Filter
Top Products
OSD (On Screen Display) FUNCTION BU'FrONS
MENU BU'rFON
Used to enter the On-Screen Programming mode.
CLEAR BU1 rON
Used to go backward and correct the programmed
information.
DISPLAY Bu'n'ON
Press to display the VCR operation mode, tape
counter, channel number, date and clock. Press this
button once again to remove the on-screen display.
Press this button twice to remove the clock display
(the display switches by pressing the "CLOCK/
COUNT" button when tape is inserted).
NUMBER BUTFONS "0" THROUGH "9"
Select any channel by pressing two buttons. (Press
"0" and then "8" for channel 8.) The number buttons
are also used for setting the On Screen Program-
ming.
"100" BUTTON
Use to select TV channels with number 100 or
above. Press "100", "2" and "3" in this order to
select channel 123.
Press "100", "0" and "5" for channel 105.
VISS BU'FrON
Use to enter the VISS function mode.
CLOCK!COUNT Bu'n'ON
To switch the display between the counter memory
and clock modes.
NOTE: To "CLOCK/COUNT" button does not work
when the tape is not inserted.
POWER
TU/AV TVNCR
O0
CHANNEL/
TRACKING
pLAY
/
MENU CLEAR DISPLAY i
@®®
I
I
@®®
i I
_, kSP/LP/EP
' o__'
,_ _J
CLOCK!
VISS COUNT RESET
ADr
COUNTER "RESET" BUTTON
The readout of the tape counter
"0:00:00" when this button is pressed.
will return to
REMOTE CONTROL
ADD/ERASE BU'FfON
Used to add or erase a selected channel memory.
-19-