Filter
Top Products
CLOCK SETTING (By using the Remote Control)
_Things to know before starting w
• The clock uses the 12-hour system. (Be sure to
set AM and PM correctly.)
• When the VCR and "IV are turned on for the first
time, the clock will read ..... . If the clock
display disappears, press the DISPLAY button
to recall it.
• The buttons for setting the clock are on the
remote control.
• While you are setting the clock, the "Menu
display" on the TV screen will prompt you
through the procedures.
• Ifyou have entered a wrong number by mistake,
press "CLEAR" button several times to erase
the wrong number. Then re-enter a correct
number.
• If you input an illogical time or date (13th month
for example), "?" will appear on the TV screen.
(It will not enter the memory.)
"MENU" Button
Number Buttons
"O"through "9"
r, i.
o®®:
®o:
OGO
"CLEAR" Button
"DISPLAY" Button
li} Turn on the power of both VCR and TV.
i_ Be sure that the TV is set to the VCR Output
Channel (channel 3 or 4).
i_ Aim the remote control at the sensor on the
front panel of the VCR.
NOTE: If direct VIDEO/AUDIO connection is made
between the VCR and the -rv, set the TV's source
selector to VIDEO.
i_ Press "MENU" button on the remote control.
The "MENU", as illustrated, will appear on the
TV screen.
PUSH SELECTION NUMBER
1 CLOCK SET
2 NORMAL PROGRAM
3 DALLY PROGRAM
4 WEEKLY PROGRAM
5 PROGRAM REVIEW
6 SET UP
TO END PUSH MENU
Main MENU (English)
i} Press "1" button to set clock. The display
prompts you to set the hour.
CLOCK SET
TIME -_J-'/: ....
/1\
TO END PUSH MENU
-21 -