Filter
Top Products
RECORDING WHILE YOU ARE AWAY
Be sure that the clock is set to the correct time.
(Refer to "CLOCK SEI-IING" on page 21 .)
1. insert the cassette.
NOTE: Before starting check that the erase
prevention tab is not missing. If it is removed,
recording will not start.
3. Press "POWER" ON/OFF button to OFF. The
TIMER indicator will appear on the VCR display.
NOTES:
1. If the erase prevention tab is removed, the cas-
sette is ejected automatically and the
"TAPE-IN" indicator will flash. Stick a piece of cel-
lophane tape over the erase prevention hole on
the cassette to enable recording.
2. The "TAPE-IN" indicator will flash if a cassette is
not inserted.
2. Set the program timer for the;
Menu program Number
Program Mode
Input Select
Channel
Tape Speed
Record-starting time
Record-stopping time
Date (on which to recording is to be made)
(Refer to "PROGRAM TIMER SETTING" on
pages 24 through 28.)
Number Buttons
_Y
UENU _ D_tAy
(_ (_ (_
:QQQ:
®®,
L ....
000
REMOTE COWmOL
"INPUT SELECT"
Button
"TIMER" Indicator
"POWER" ON/OFF Button
4. The recording will start and the " TIMER " and the
" REC" indicators will light at the time you have
programmed.
NOTES:
1. When the TIMER indicator is on, your VCR can
not be operated manually (except POWER but-
ton).
2. If the tape runs out (if the end of the tape is
reached) during timer recording, the mode will
change automatically to STOP, REWIND and
EJECT in this order. At that point, power will
cease to be supplied to prevent the recorded tape
from being overlapped.
3. If the "TIMER" indicator goes off it indicates that
there has been a power interruption and the "[]me
and Programming need to be reset.
4. To stop the VCR during "l]mer Recording, press
"POWER" ON/OFF button OFF.
- 23 -