Goldstar R-E21M VCR User Manual


 
VCR/TV CONNECTIONS
\
Antenna Splitter
(75-ohm to VHF/UHF 300-
ohm) (not supplied)
=/
@.@ ] __J
@_@ IDDDQDDDDD
=o ODODDDDO0
DOgDDD
To "OUT TO TV"
III
111
"= OR
75-ohm Com(lal Cable
with Antenna Adaptor
(accessory number 1,)
i
"rJI
TV Antenna Terminals
1. Connect the 75-ohm Coaxial Cable with
Antenna adaptor (accessory number 1) to "OUT
TO TV" on the VCR. Connect the other end to the
Antenna Splitter (75-ohm to VHF/UHF 300-ohm)
(not supplied) or 75-ohm antenna input on back
of rv, as illustrated above.
2. Connect the wires marked "UHF" on the Splitter
to the UHF terminals on the rear of your televi-
sion.
3. Connect the wires marked "VHF" on the Splitter
to the VHF terminals on the rear of your televi-
sion.
-7-