Filter
Top Products
USING THE COUNTER MEMORY FEATURE
The tape counter on this VCR indicates the tape travel time in hours, minutes, and seconds during recording
and playback.
The memory feature allows you to return to a
specific spot on the cassette after recording or
playing.
The memory works with the Counter to return to a
particular spot on the cassette. The memory is
designed to stop when the counter reaches
"0:00:00" during rewind (REW).
This feature is especially helpful when editing a
recording.
1. Press "CLOCK/COUNT" button repeatedly for
counter memory mode. The indicator "M"
appears.
2. Press "DISPLAY" button twice for counter display
on the screen if necessary.
3. Start playing or recording a tape.
4. At the point you want to start, press "RESET"
button ta reset the counter to "M0:00:00".
5. Continue to play or record.
6. Press "STOP" button.
7. Press "REW" button. The tape will be rewound to
the preselected point approximately at
"M0:00:00".
NOTES:
1. The linear time counter does not operate for non-
recorded portions.
2. The tape counter will be automatically reset
"0:00:00" when the tape is loaded.
3. If a tape is rewound beyond "0:00:00", the
counter will show a negative indication.
4. The tape starts moving from "0:00:00" and
counter indicates amount elapsed time.
REAL TIME COUNTER
,, i
"REW"
Button _[_
QQ®
"STOP"
Button
=DISPLAY" Button
"RESET" Button
"CLOCK/COUNT" Button
The real time counter can be calculated by pressing "CLOCK/COUNT" button.
Each time the "CLOCK/COUNT" button is pressed, the display switches as follows.
CLOCK
02:15 PM
Hour indication __
Minute indication
REAL TIME
COUNTER
I
Hour
indication
MO:O0:O0
I I I
Minute
indication
I
Second
indication
- 34 -