Go-Video VR3845 DVD VCR Combo User Manual


 
38 DVD Recorder+VCR User’s Guide
Program Playback
Program Playback with
Music CDs
To program a custom playback list from
an Audio CD, or MP3/WMA files on a
recordable CD/DVD:
1 Load your disc in the disc tray.
The “Audio CD” (or “MP3”) menu ap-
pears.
2 Use the  keys to select a track.
3 Select the following button and press
ENTER to add the selected track to
the Program list:
Repeat to place additional tracks on
the list.
To add all tracks to the Program
list, select the following button and
press ENTER:
4 Select the track you want to start
playing on the Program List, then
press PLAY
or ENTER.
Playback begins in the order in
which you programmed the tracks.
Playback stops after the last pro-
grammed track on the Program list.
NOTE:
Audio CD programs can contain up
to 99 tracks; MP3/WMA programs can
contain up to 256 tracks.
1:07:30 1/19
Close
TRACK 01
List Program
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
TRACK 07
TRACK 08
Audio CD
Play Modes during Program
Playback
Press PLAY MODE to select the desired
play mode.
TRACK - Repeats the current track.
ALL - Repeats all tracks on the Pro-
gram List.
OFF - Cancels Repeat mode (no dis-
play).
Random - Random playback on the
Program List.
Erasing Tracks from a
Program List
1 Use the  keys to select the
track you wish to erase from the Pro
-
gram list.
2 Press CLEAR, or select the following
button and press ENTER, to erase the
selected track from the Program list:
Repeat to erase additional tracks
from the list.
To erase all tracks from the Program
list, select the following button and
press ENTER:
The Program list is also cleared
when the disc is removed.