Filter
Top Products
10
Connecting the power cord
1 Plug the power cord supplied into the »220-240V~« socket on the back of
the Receiver/Player.
2 Insert the power cord plug into the socket.
Caution:
The only way to disconnect the Receiver/Player from the mains supply is to
pull the plug.
Inserting batteries in the remote control
1 Open the battery compartment by pressing the snap-catch, and remove the
lid.
2 When inserting the batteries (mignon type, for example, LR 6 or AA 2 x
1.5V), observe the polarity marked on the battery compartment.
3 Point the remote control at the Receiver/Player and press the »STB« button.
The »TV« key has no effect for this product. If pressed accidentally
press »STB« again to restore operation of the handset.
Note:
If the Receiver/Player no longer reacts properly to remote control commands,
the batteries may be flat. Always remove flat batteries. No liability is accepted
for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which are heavy metal-free, may not be disposed of
with household waste. Please dispose of used batteries in an environmentally
sound manner. Find out about the legal regulations which apply in your area.
CONNECTION AND PREPARATION