Grundig GRP6000 TV DVD Combo User Manual


 
18
From time to time new services are launched which may require your receiver to
be upgraded with new software before you can use them. Sometimes new
features may be introduced to enhance your receiver.
Notification
This menu is automatically displayed when a new “Over-Air-Download” is
detected after switch on. You now have three options.
To start the download immediately, press »OK«.
Select »DOWNLOAD LATER« to set a timer event to receive the new
software during the night.
Refuse the download at this time by pressing » «. (However, the download
may be re-detected and indicated the next time you switch on.) It is highly
recommended that you keep your receiver up to date.
Check for download
You can manually check to see if new software is available for download. If there
is one available, you will see the download menu as above.
To check:-
1 Press » «, select »SETUP« and press »OK«.
2 Select »CHECK FOR DOWNLOAD« and press »OK«.
3 If no download is available, press » « to exit.
4 Press »OK« to start. Alternatively, schedule the download for later.
The download can take up to 20 minutes so please be patient. After the
download, details about the new software will be displayed for you. There may
also be a telephone number to call in case of any difficulty.
If the download fails, try again later.
During part of the download, DO NOT switch off the receiver, this warning is
displayed on screen.
UPGRADING YOUR RECEIVER
TV MODE