Filter
Top Products
13
Connecting a 2nd TV and optional 2nd handset
If you wish you can connect a second TV to the Receiver/Player. This allows the
second TV to view either the DVD picture or the Digital TV signal from a different
room. If you purchase the optional External Infrared Receiver Kit you can
also control the Receiver/Player from the second room.
1 Press » «, select »SETUP« menu and press »OK«.
2 Select »RF Modulator Setup« and press »OK«.
3 Now choose if you wish the RF outputs enabled using »#«/»$« to select
»ON« (picture available on 2nd TV) or »OFF« (picture on 2nd TV switched
OFF)
4 Now choose if you wish to enable the External IR for control from a 2nd
room. Use »#«/»$« to select »ON« or »OFF«.
5 You can adjust the channel of the RF modulator to avoid any interference
from other TV channels. Choose a channel between 21 and 69 using
»#«/»$«.
6 Choose the output standard for the RF modulator. Use »#«/»$« to choose
between »PAL-I« for the UK or »PAL-G« for the rest of Europe.
7 To aid RF tuning, the Receiver/Player has a built in »Test Pattern«. Use
»#«/»$« to turn it »ON« or »OFF«. The test card is two vertical white bars
on a black background.
PIN number
You can choose a PIN (Personal Identification Number) for use with parental
controls. The receiver was originally programmed with 1234. It is recommended
that you change this for your own number.
1 Press » «, select »SETUP« menu and press »OK«.
2 Select »PARENTAL CONTROL« and press »OK«.
3 Now enter the current PIN ****. (1234 if this is your first change).
4 Select »CHANGE PIN« and press »OK«.
5 Use »0..9« to enter a new PIN.
6 Use »0..9« to confirm new PIN. When confirmed, this number is now stored.
KEEP THIS NUMBER SAFE!
7 To exit menu press » «.
ADVANCED SET-UP
TV MODE