Filter
Top Products
16
To record an analogue channel ensure that the aerial connections to your VCR are
as shown in the connection diagram and use the VCR as normal.
To record a digital channel, connect the receiver directly to your VCR via the VCR
scart socket on the rear of the receiver (see connection diagram). Please consult
your VCR user manual for details on recording via AV or AUX inputs.
The TIMER PROGRAMMING function enables the receiver to :-
●
Automatically switch to your pre-selected channels at pre-selected times.
● Start Auto Record on the VCR (where the VCR supports scart automatic
recording function, see your VCR manual for details on this.)
NOTE: The system may not accept a start time less than 5 minutes ahead of the
current clock time displayed in the menu.
1 Press » «, select »TIMER PROGRAMMING« and press »OK«.
2 Using »!«/»"« select a free event, or select an event you wish to alter and
press »OK«.
3 Using »#«/»$« select the program you wish to record or use »0..9« to enter
the number directly, e.g. »003«.
4 Press »"« to select the date and enter the date directly using »0..9« or use
»#«/»$« to choose.
5 Press »"« to select the time and enter the start time directly using »0..9« or
use »#«/»$« to choose.
6 Press »"« to select the duration and enter the length of the program using
»0..9« or use »#«/»$« to choose.
7 Press »"« to select repeat. Press »$« to choose from »WEEKLY«, »DAILY«,
»MON-FRI«, »MON-SAT« or »NO«.
8 Press »"« to select subtitles. Press »$« to choose »YES«or»NO«.
9 When the details are correct, press »OK« to store them.
10 To exit menu, press » «
If a mistake has been made during DETAIL ENTRY, an error message will be
displayed at the bottom of the screen. For instance, in the event of 2 programmes
being entered with similar start times, then an EVENT CLASH error message will
be displayed. If any errors are found during this stage, the system will not allow
any further progress.
When the Timer Event has been activated, the VCR light in the display will be
lit for the duration of the event. A suitably equipped VCR will record automatically
during this time. Please note that unless your VCR supports automatic scart
recording YOU MUST ALSO SET THE VCR TIMER.
In order to delete an entry you no longer need, position the cursor over the entry
to be removed in the »TIMER PROGRAMMING« menu and press » «.
Cancel an event at any time by pressing » «. Press » « again to confirm.
TIMER PROGRAMMING AND
RECORDING
TV MODE
RED