Filter
Top Products
40
Adapting the analogue output to the HiFi system
With this you set the output level of the audio signal and the audio operation type
(stereo, surround or Dolby Surround Composite).
1 Press » « to call up the main menu.
2 Select »Sound« and press »OK«.
3 Select »Extended setting« and press »OK«.
4 Select »Analog« and press »OK«.
Note:
For further operation, see the following sections, each one starting from
Step 1.
Setting the output level
1 Select »Output level« and press »OK«.
2 Change the output level step by step (from »0dB« to »20 dB«) with »"« or
»!«, or with »#« and »$« in increments of 10, and press »OK« to confirm.
Selecting the audio mode
1 Select »Downmix mode« and press »OK«.
2 Select the desired mode (»Stereo« or »Surround Sounds« or » Surround
Comp«) with »"« or »!« and press »OK« to confirm.
3 Press » « to quit the menu.
USING EXTERNAL DEVICES
DISC MODE
Digital
Extended settings
Analogue
●
Back
●
Quit
Output level
Analogue
Downmix mode
●
Back
●
Quit
0 dB
Stereo
Downmix mode
Surround sound
Surround comp
●
Back
●
Quit
Surround Comp