Filter
Top Products
12
TV Setup
You can choose how pictures are displayed on your TV.
1 Press » «, select the »SETUP« menu and press »OK«
2 Now select »TV SETUP« and press »OK«.
3 Now choose the type of TV screen you have. Use »#«/»$« and choose
»16:9« for a widescreen TV or »4:3« for a conventional one.
4 The »Widescreen«option chooses how widescreen images are shown on
a conventional (4:3) TV. Use »#«/»$« and choose from »Letterbox«
»Centre Cutout« (centre action only shown) or »Full Frame« (stretched).
5 Now choose the »Video Output« mode. Use »#«/»$« to choose from
»RGB« (best quality pictures for TVs that support it) or »PAL« (suitable for all
other TV sets).
6 Now choose how the VCR scart socket and RF outputs are to behave. Use
»#«/»$« to choose from »Follow TV SCART« (Same output as the TV
socket) or »Don’t Follow TV« (independent output).
CAUTION: If you have not connected your main TV with a scart lead, DO
NOT select »Don’t Follow TV« as you may lose control of your
Receiver/Player. Should this happen accidentally, turn off the power to the
Receiver/Player and switch on again. Then switch the VCR scart back to
»Follow TV scart«.
7 To exit menu press » «.
Languages
You can choose your desired languages for Sound, Subtitles and Interactive (data)
Services, where more than just English is being transmitted.
1 Press » «, select the »SETUP« menu and press »OK«.
2 Select »LANGUAGES« and press »OK«.
3 Select »Subtitles«, »Data Services« or »Audio« using »#«/»$«.
4 Use »#«/»$« to choose the desired language or »Off« to suppress
Subtitles.
5 To exit menu press » «.
ADVANCED SET-UP
TV MODE