Filter
Top Products
3654 Portable H2/N2 Analyzer - Installation 13 of 66
Operator Manual
ORBISPHERE
1.7 Flow Chamber Installation
The model 32013A or 32015 flow chamber allows the liquid or gaseous sample past the
TC and temperature sensors. The flow chamber attaches to the TC sensor with a
threaded collar and is sealed to the sensor with two O-rings (EPDM
∅20x2 mm and NBR
∅4x1.5 mm).
CAUTION:
At the top of the TC sensor is a thermistor to measure the sample temperature. Do not
bend or damage this component.
The flow chamber’s inlet and outlet use ¼-inch diameter transparent plastic tubing.
Connect by compression fittings to the sample source and to the drain, respectively.
You may also have received a model 32051 sample tube adapter to attach the flow
chamber inlet tubing to the sampling point (see “WIN3654 PC Program Installation” on
page 10).
Fig 1-4:
Flow Chamber 32013A