Filter
Top Products
Setting Up
Setting Up 13
The procedures that follow, presented in the order
listed in the table, describe connecting optional
equipment including the audio connections when
applicable.
Connecting an HDMI device
This is the recommended connection for video and
audio. The HDMI cable is sold separately.
1 Connect the HDMI cable to HDMI In 1 (Input 6) or
HDMI In 2 (Input 5) on the back of the TV. (There
are no separate audio inputs for HDMI.)
2 Connect the cable to the HDMI device.
3 Turn on the device, and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 15.
5 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
Connecting a DVI device
The DVI cable, DVI-to-HDMI adapter, and the audio
cables are sold separately.
1 Connect the DVI-I cable to the DVI device and
attach the DVI-to-HDMI adapter to the cable and
then to the TV HDMI In 2 (Input 5) connector.
2 Connect the audio cable to the DVI device and to
the TV Audio In (Input 5) connectors.
3 Turn on the device, and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 15.
5 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
6 Open the OSD and set the HDMI audio option in
the Audio menu to DVI. See “Selecting HDMI
audio mode” on page 29.
S-video transmits video in separate color and black-and-white
image signals and delivers a sharper image than a composite
video connection.
Video In (composite video) transmits video as a single signal.
AV connection to use, listed from best to good video playback (Continued)
Connection description TV connector Cable plug
c
CAUTION: Unplug power for the TV and all
connected components before connecting
optional equipment. Ensure that the
optional equipment is powered off.
sa6ldtv.book Page 13 Tuesday, February 21, 2006 12:35 PM