HP (Hewlett-Packard) HP PL4260N Flat Panel Television User Manual


 
14 HP Plasma HDTV User’s Guide
Connecting an HDMI device
This is the recommended connection for video and
audio. The HDMI cable is sold separately.
1 Connect the HDMI cable to HDMI on the back
of the TV. (There are no separate audio inputs
for HDMI.)
2 Connect the cable to the HDMI device.
3 Turn on the device, and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 16.
5 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
Connecting a DVI device
The DVI cable, DVI-to-HDMI converter cable, and the
audio cable are sold separately.
1 Connect the DVI cable and the DVI-to-HDMI
converter cable to the DVI-I device and then to the
TV HDMI connector.
2 Connect the audio cable to the DVI device and to
the TV PC/DVI Audio In connector.
3 Turn on the device, and start play.
4 Connect power to the TV; see “Connecting power
to the TV” on page 16.
5 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
Connecting a component device
1 Connect the component cable to the Component
In (Y, Pb, Pr) connectors. There are two sets of
component connectors you can use: Component 1
video used with Comp 1 Audio In connectors, or
Component 2 video used with Comp 2 Audio In
connectors.
2 Connect the component audio cable to the L/R
Audio In connectors on the TV.
3 Connect the cables to the device.
4 Turn on the device, and start play.
5 Connect power to the TV; see “Connecting power
to the TV” on page 16.
6 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
Connecting an S-video or Video device
A VCR, game console, camcorder, or some other
audiovisual equipment can be connected using S-video
or Video (composite video) In connectors.
CAUTION: Unplug power for the TV and all
connected components before connecting
optional equipment. Ensure that the
optional equipment is powered off.
HDMI
PC
HDMI
PC/DVI AUDIO IN
!
Both S-video and Video In connectors share
L/R Audio In connectors. (S-video 1 and
Video 1 In share Video 1 Audio In
connectors; S-video 2 and Video 2 In share
Video 2 Audio In connectors.)
Do not connect video cables to both the
S-video and the Video In connectors in
aset.
Y PR/CR
PR/CRY
PB/CB
L/MONO
R
R
COMP 2
AUDIO IN
COMPONENT 2
COMP 1
AUDIO IN
COMPONENT 1
PB/CB L/MONO