HP (Hewlett-Packard) HP PL4260N Flat Panel Television User Manual


 
16 HP Plasma HDTV User’s Guide
5 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
6 Connect the power, and turn on the PC or source
equipment.
7 Adjust the picture, including Auto Sync, by using
the onscreen display Picture/Screen menu; see
“Adjusting the PC Screen image” on page 29.
You can also press the OK button on the TV to
start Auto Sync for the PC image.
Connecting an external sound
system
You can connect an external sound system to the TV
using a digital audio or an analog audio signal:
Use an optical audio cable and the Digital Audio
Output connector on the back of the TV to provide
a digital audio signal to an external sound system,
such as a digital receiver or a surround sound
system. To hear analog sound from an analog
source on your digital audio system, you must
connect the Audio Out left and right connectors on
the TV to your sound system.
Use an audio cable and the Audio Out connectors
on the back of the TV to provide an analog audio
signal to an external sound system, such as an
analog amplifier or stereo system.
1 Connect the external sound system to the TV:
For digital connection, connect an optical
audio cable to the Digital Audio Output
connector on the back of the TV and to the
external sound system, such as a digital
receiver or a surround sound system.
Or
For analog connection, connect an audio
cable to the Audio Out connectors on the back
of the TV and to the external sound system,
such as an analog amplifier or stereo system.
2 Connect power to the TV; see “Connecting power
to the TV” on page 16.
3 Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 17.
4 Connect power and turn on the external sound
system.
5 Define the digital audio format in the onscreen
display Audio/Digital Audio menu; refer to
“Choosing the Digital Audio mode” on page 30.
Connecting power to the TV
1 Connect the power cord to the connector on the
back of the TV.
2 Connect the power cord to the AC power outlet.
CAUTION: Unplug power for the TV and all
connected components before connecting
an external sound system. Ensure that the
external sound system is powered off.
DIGITAL AUDIO OUT
R
L/MONO
VIDEO OUT
AUDIO OUT
AC IN
100-240V~50/60Hz