Hitachi 13VR10B TV VCR Combo User Manual


 
VIDEO CASSETTE
12
VIDEO CASSETTE
This TV/VCR will operate with any cassette that has the VHS mark. For best
results we recommend the use of high-quality tapes. Do not use poor quality
or damaged tapes.
PRECAUTIONS
• Avoid moisture, which can condense on the tape if it is moved from a cold
place to a warm place. Before using a tape with these conditions, to avoid
damage to the tape and your TV/VCR, wait until the tape has warmed to room
temperature and the moisture has evaporated.
• Avoid extreme heat, high humidity and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
THREE DIFFERENT TAPE SPEEDS
Before recording, select the tape speed from: SP mode (Standard Play), LP
mode (Long Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/playback time using T60,
T120, or T160 tapes in each mode.
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but
continuously, on the center-back of the cassette until it is drawn into the VCR.
The VCR will automatically turn on.
REMOVING A CASSETTE
1) In the Stop mode, press STOP/EJECT button on the TV/VCR. The
cassette will eject.
2) Pull the cassette out of the cassette compartment.
3) Store the cassette in the case as shown.
ERASE PREVENTION
You can prevent accidental erasing of recording by breaking off the tab on the
back edge of the cassette. If you decide to record on the tape again, cover