Filter
Top Products
SEARCH
39
• The index mark will be made automatically when the REC button is pressed. It
will also be marked at the starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL button is pressed and
released during recording.
• The time gap between making the index marks on the tape should be greater
than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for
SLP recording.
• Index marks cannot be made if the erase-protection tab on the cassette has
been removed.
• Index search can be set up to 20.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this mode.
• You must use the remote control for this procedure.
Make sure...
• Power must be turned on.
• Insert a tape.
In the example below: You are watching fourth program (progrm number 4)
and want to fast forward to seventh program (program number 7). You must
skip three programs.
1 Select "INDEX SEARCH" mode
Press MENU button repeatedly to point to "INDEX SEARCH".
Then, press SELECT button.
2 Enter your desired number of program that you want to skip
Press CH or button repeatedly until your desired number of program
that you want to skip is appeared. (Example: To skip three programs)
3 Begin Index Search