Filter
Top Products
SEARCH
38
TIME SEARCH
The Time Search function makes it possible to quickly advance the tape to
your desired position from any position by entering the exact amount of
playback time of the part you want to skip.
NOTES:
• Time Search is set up to 9 hours 50 minutes (9:50) by 10 minutes at a time.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this mode.
• This function is not operative when a cassette tape is not inserted in the
TV/VCR.
In the example below: To watch a program after 2 hours, 50 minutes from the
present position, in either direction.
1 Select "TIME SEARCH" mode
Press TIME SEARCH button
OR
Press MENU button repeatedly to point to "TIME SEARCH".
Then, press SELECT button.
2 Enter your desired time
Press CH or button repeatedly until your desired time appears.
(Example: "2:50" for 2 hours 50 minutes)
3 Begin Time Search
Press REW or F.FWD button. The tape will move to the specified point.
The time counts down as the searching progresses.When 0:00 is reached,
the tape will start playback automatically.
TO CANCEL THE TIME SEARCH
• While setting: Press MENU button.
• While the Time Search is in progress: Press STOP/EJECT button on the
TV/VCR or the remote control. This will delete the selected time.
INDEX SEARCH
This feature provides a method of indexing the starting point. And you can
easily search the index mark in either fast forward or rewind direction.
NOTES: