PRESET FOR USE
19
PRESET FOR USE
The first time you may want to selct language (English or Espanol=Spanish)
and preset the tuner to scan only the channels you receive in your area. You
must use the remote control for the following steps.
NOTE: Channel memory programming is not needed when using a
converter/descrambler box.
PRESET FOR THE FIRST TIME
1 Connect the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
2 Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
3 Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL=Spanish" using CH or button or
SELECT button. "[ ]" marks indicate the selected language.
4 Begin auto preset
Press MENU button to point to "AUTO PRESET"
Then press SELECT button. The tuner scans and memorizes in the active
channels in your area.
NOTES:
The TV/VCR distinguishes between standard TV channels and CATV
automatically.
If you want to play or record a video tape BEFORE presetting the tuner, you must
press MENU button. To preset the tuner again, see "AUTO PRESET AGAIN".
5 After scanning
The tuner stops on the lowest memorized channel. (TV mode: from CH 02/
CATV mode: from CH 01) You may want to recall the selected channels, you
can select the desired channel directly with the remote control number button
or CH or .
TO RETURN TO TV MODE WHEN SCANNING
Press MENU button in scanning mode.