Filter
Top Products
PICTURE-IN-PICTURE (PIP) - 22 -
3 SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
NOTE: The SWAP function will not operate if ANT B input is set as the main channel (ANT B input
cannot be displayed as a sub-picture.)
Model 36CX35B does not have ANT B input.
4 MOVE button
To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step
counter-clockwise every time the MOVE button is pressed. (Example below illustrates the MOVE
operation for initial shipping conditions. If you have customized a PIP position, the MOVE operation may
differ slightly from the example.)
It is also possible to customize the PIP position. To do this, wait until the On-Screen Display disappears
(after eight seconds) and then use the cursor
, , , buttons.
5 FREEZE (FRZ) Button
If you wish to freeze the sub-picture, press the FRZ button. This is convenient when trying to write down
the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to
motion, press the FRZ button again.
6 QUICK FREEZE (FRZ) Button
Press this button without a sub-picture to freeze the picture you are currently viewing. Press this button
again to return to normal viewing.