Filter
Top Products
AUDIO - 40 -
TREBLE
This function controls the high frequency audio to all speakers.
BALANCE
This function will control the left to right balance of the TV internal speakers, the AUDIO TO HI FI output.
RESET
When RESET is selected, press CURSOR to return audio adjustments to factory preset conditions.
ADVANCED SETTINGS
Use ADVANCED SETTINGS to improve the sound performance of the TV depending on listening
conditions.
Advanced Audio Settings Screens
Press CURSOR
or to highlight a function.
Press CURSOR
to change the function setting.
Press EXIT to quit menu or CURSOR
to return to previous menu.
MTS MODE
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), SAP (second audio
program) which may be a secondary language, weather report, etc. or MONO (monaural sound) used when
receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you select will be displayed
to the left of the channel number. See example below for each selection when both stereo and second audio
are received (monaural is always received).
INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from
a separate stereo system.
AUTO NOISE CANCEL
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will
automatically eliminate the audio for that channel.
LOUDNESS
This function will improve the quality of both low and high frequency sounds when listening at low volume
levels.
DYNAMIC BASS (36UX52B and 32UX51B only)
This function allows you to enjoy spectacular bass sound that would normally be heard only with expensive
home speaker systems.
*NOTE: Dynamic Bass is only available for model 36UX52B and 32UX51B.