Filter
Top Products
29
G
U
I
D
E
A
/
V
N
E
T
THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI LCD TV, the new remote control is designed to operate different types
of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one
touch. Basic operation keys are grouped together in one area.
To operate your LCD TV, point the remote control at the remote sensor of the AVC box/Display Monitor and select the TV by
pressing the ̇ or ̈ button of the Source Access on the remote. The TV mode indicator will blink, indicating that the remote will
now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and select PVR by pressing the ̇ or ̈ button of the
Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now control your VCR (see page
48 for instructions on how to program the remote to control your VCR).
To operate your PVR (Personal Video Recorder), point the remote at the remote sensor of the PVR and select PVR by pressing
the ̇ or ̈ button of the Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now
control your PVR (see page 48 for instruction on how to program the remote to control your PVR).
To operate your cable box, point the remote at the remote sensor of the cable box and select the CABLE (CBL) by pressing the
̇ or ̈ button of the Source Access on the remote. The CBL mode indicator will blink, indicating that the remote will now control
your cable box (see page 45 for instructions on how to program the remote to control your cable box).
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and select the SET-
TOP-BOX (STB) by pressing the ̇ or ̈ button of the Source Access on the remote. If you have a satellite receiver, use this
button to program your satellite receiver. The STB mode indicator will blink, indicating that the remote will now control your set-
top-box (see page 46 for instructions on how to program the remote to control your set-top-box).
To operate your DVD player, point the remote at the remote sensor of the DVD player and select DVD by pressing the ̇ or ̈
button of the Source Access on the remote. The DVD mode indicator will blink, indicating that the remote will now control your
DVD Player (see page 47 for instruction on how to program the remote to control your DVD
player).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and select
AMP by pressing the ̇ or ̈ button of the Source Access on the remote. The AMP mode indicator will blink, indicating that the
remote will now control your audio equipment (see page 49 for instructions on how to program the remote to control additional
NOTE: When you press any remote control button, the buttons will light up. The illumination will light
a few seconds during this time. The buttons will appear to light if the room is dark.
GUIDE
A/V NET
THE REMOTE CONTROL
DESCRIPTION: THE DEFAULT BACK LIGHTING TIME IS 4 SECONDS. THIS LIGHTING TIME CAN BE
CHANGED TO A MAXIMUM TIME OF 8 SECONDS OR TURNED OFF. THIS GIVES THE RC A TOTAL OF 3
OPTIONAL LIGHT TIME CYCLES (OFF, 4 SECONDS OR 8 SECONDS.)
1. PLACE THE RC IN TV MODE.
1. PROGRAMMING OPTIONAL BACK LIGHT CYCLES.
2. PRESS AND HOLD THE "ENT" KEY.
3. WHILE HOLDING DOWN THE "ENT" KEY ENTER THE FOLLOWING KEYS IN SEQUENCE:
"-" + "-" + "INPUT" + "THE NUMBER KEY OF THE DESIRED LIGHT CYCLE".
2. LIGHT CYCLE EQUIVALENTS
1. BACK LIGHT TURNED OFF = "0" KEY (ENTERED AS THE LAST KEY OF THE PROGRAM SEQUENCE)
2. BACK LIGHT FOR 4 SEC = "4" KEY (ENTERED AS THE LAST KEY OF THE PROGRAM SEQUENCE)
3. BACK LIGHT FOR 8 SEC = "8" KEY (ENTERED AS THE LAST KEY OF THE PROGRAM SEQUENCE)
3. SETUP EXAMPLE
1. EXAMPLE SETUP FOR 8 SECOND LIGHT CYCLE3. SETUP EXAMPLE
2. PLACE RC IN TV MODE
3. PRESS AND HOLD "ENT" KEY
4. WHILE HOLDING DOWN THE "ENT" KEY ENTER THE FOLLOWING KEYS IN SEQUENCE:
5. THE TV MODE LED ON THE RC WILL FLASH 3 TIMES IF THE SETUP WAS DONE CORRECTLY
"-" + "-" + "INPUT" + "8".