Hitachi 37LD9700C Flat Panel Television User Manual


 
21
ENGLISH
BASIC OPERATION (continued)
Easy Preset
When you turn ON the TV for the rst time, your TV automatically leads to the settings of
“Language,” “Country” and “Auto Tuning.” (Also, refer to the attached Quick Guide.)
1.
The rst screen appeared will ask you to choose the language of your Analogue TV’s
display.
2. Using button, select language you preferred from the list and press
OK
button.
3.
Then, using button, select your residing country and press
OK
button.
4. The auto tuning screen appears, and your TV will now search analogue channels
through the frequencies storing them in order.
If you have 32/37LD9700U:
5. The dialogue box will appear to ask you if you wish to tune in the DTT channels and
select “Yes” so that your TV will start searching the DTT channels.
If you have 32/37LD9700C/N:
5. The box appears to ask you to select language for DTT auto tuning.
6. Using button, select language from the list and press
OK
button.
7. Then, using button, select your residing country and press
OK
button.
8. The dialogue box will appear to ask you if you wish to tune in the DTT channels and
select “Yes” so that your TV will start searching the DTT channels.
NOTE
DTT auto tuning is not available on 9600 models.
If you want to change the setting after completing this easy preset, press
MENU
button
and set up individually.
- See
24
25
about the Analogue setting.
- See
41
about the DTT setting.
Setup
Auto Tuning
Scanning Channel Number: 33
Cancel
OK
Cancel
Language
English
Svenska
Norsk
Suomi
Dansk
Česky
Polski
Magyar
Slovenski
Hrvatski
Select Return Exit
Do you want to start automatic search?
Yes No
AUTOMATIC SEARCH
Searching UHF Channel: 61. Please wait. This will take a few minutes.
0%
100%
BBC ONE
BBC TWO
BBC THREE
BBC NEWS 24
BBCi
CBBC Channel
Cancel search
MENU
Depending on your residing country, it does not proceed to DTT auto tuning (5~8).
DTT auto tuning process varies according to the model.
This is an example of
32/37LD9700U/N.