Filter
Top Products
68
FUNCTION (continued)
Power Save Mode
When AV input is selected
You are provided with the function to save power consumption when no signal is detected in AV input. Set to On in
“Video Power Save” from Function Menu, which leads to the power save mode in AV4 /HDMI1 /HDMI2 and the
Standby mode in other AV input. (Please see the table below for details)
Refer to
30
about “Video Power Save”
.
When no signal is detected
When signal is input during
On in “Video Power Save”
Condition Indicating Lamp
AV4,HDMI1, 2 Power Save Orange Turns On automatically.
AV1, 2, 3, 5 Standby Red Remains as Standby mode.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
PC signal Active (normal display) Blank (no display)
Operation mode On Off
Indicating lamp Lights green Lights orange
Returning to operating status
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button of
the remote control.