Hitachi 37LD9700C Flat Panel Television User Manual


 
57
ENGLISH
FUNCTION (continued)
Multi Picture Mode (continued)
2-picture mode (continued)
4. To switch to 4-picture mode, press
2-4-12
button once.
The 4-picture mode is displayed on the screen.
NOTE
Each time
2-4-12
button is pressed, the picture mode will be switched by following order.
2-Picture 2-Picture (1080i)* 4-Picture 12-Picture (TV mode only)
*
When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))
which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.
5. To EXIT from the Multi Picture mode, press
button.
Next time you press
button to activate the Multi Picture mode, it will start from 2-picture mode.
4-picture mode
You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.
NOTE
The audio comes out ONLY from side A.
You can change the channels or change Input modes on the side with (red triangle) mark.
1. To switch the location
Press button on the remote control.
The mark will shift to side A and side B back-and -forth.
2. To change the channel
Make sure that mark is located on the side you want to make changes.
Side A: Press
P
-
+
button to select channels.
Side B: Select the frame (B1~B3) that you want to make changes
with button. The characters of selected frame will be highlighted in green.
Press
P
-
+
button to select channels.
3. To change Input mode
Make sure that mark is located on the side you want to make changes.
Side A: Press Input Select buttons on the remote control.
Side B: Select the frame (B1~B3) that you want to make changes
with
button. The characters of selected frame will be highlighted in green.
Press Input Select buttons on the remote control.
B1 8
B2 6
B3 11
5
A
The selected picture with red triangle mark
AV2
AV1
(Sub-
screen)
[2-Picture (1080i) Mode]