Hitachi 37LD9700C Flat Panel Television User Manual


 
49
ENGLISH
Con guring the Setting (continued)
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
The DTT can be upgraded via the con guration menu.
1. Press
MENU
button on the remote control.
2. Select “Con guration” from the DTT main menu.
3. Select “Receiver Upgrade”.
4. Press
button to select “Automatic Download” along
with “Enabled”.
Automatic upgrade method takes place in standby/power save
mode.
The indicator lamp will blink whilst this is taking place.The TV will
check if new software is available every time you go to standby/
power save or every night at 3:00 a.m. if select “Enabled”.
You can check the current software version on the con guration
menu. (See
41
as an example.)
NOTE
• Manual upgrade starts if the “Search for New Version” button is pressed instead of “Automatic
Download” button. To use this method, follow each dialogue box in sequence.
• We do not recommend that the set is left in standby/power save mode if you intend to leave the home for a long time.
• While downloading software, you cannot operate TV. No picture is displayed, either.
By activating Favourite Mode from the con guration menu, only selected favourite channels will appear when using
button on the remote control to switch channels.
Refer to
43
how to set the channel as Favourites.
1. Press
MENU
button on the remote control.
2. Select “Con guration” from the DTT main menu.
3. Select “Favourite Mode”.
4. Use button to select “On” to be activated.
Upgrading DTT
Setting Favourite Mode
Automatic Download Enabled
Search for New Version
MENU EXIT i+ More