Filter
Top Products
14
TIPS ON REAR PANEL CONNECTIONS
TIPS ON REAR PANEL CONNECTIONS
S-Video connections are provided for high performance laserdisc players, VCRs etc., that have this
feature. Use these connections in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting
your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or
line output (INPUT: 1 in the example on page 13.) Refer to your VCR operating guide for more
information on line.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-PB-PR inputs to connect to Input 1 or Input 2, but
only one of these may be used at a time.
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
COMPONENT: Y-PB-PR connections are provided for high performance components, such as DVD
players. Use these connections in place of the standard video connections if your device has this feature.
When using the Y-PB-PR input jacks, connect your components audio output to the TV's Input 1 or Input
2 Left and Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case connect the components B-Y output
to the TV's Cb input and the components R-Y output to the TV's PR input.
Your component outputs may be labeled Y-CB-CR. In this case connect the components CB output to the
TV's PB input and the components CY output to the TV's PR input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PB-PR inputs. (See
pages 54.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using Y-PB-PR
jacks.