Filter
Top Products
23
(14) ASPECT buttons
Press the button to quickly change the aspect ratio of the viewable video between 4:3 and 16:9. (See page
55 for more information)
(15) COMMERCIAL SKIP buttons
Press the this button repeatedly to select channel skip time (30-180 seconds) when no menu is displayed
and the TV will tune to the last channel viewed when the selected amount of time is up. The user can
change stations "SURF" to any station they wish, and after the selected amount of time, the TV will tune
back to the original channel.
(16) MENU buttons
The MENU button will start the On-Screen Display.
(17) EXIT buttons
When in MENU mode, this button will exit all On-Screen Displays.
(18) THUMB STICK/SELECT buttons
All the On-Screen Display features can be set or adjusted by using the THUMB STICK.
The THUMB STICK will highlight function or adjust and set different features. press the THUMB STICK
toward desired direction and press down to SELECT.
(19) VOLUME, MUTE button
Press the VOLUME up (
) or down ( ) button until you obtain the desired sound level.
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the
MUTE button. Press the MUTE button again to turn the sound off completely (MUTE). To restore the
sound, press the MUTE button one more time, or press the VOLUME up (
) button.
(20) RECALL button
Press this button when no menu is displayed, when you want to check the channel being received, the
picture source, or if the channel has stereo (ST) or second audio (SAP), the time, CHANNEL ID, if the
Commercial Skip (C.S.) is activated and the SLEEP timer is set.
When an S-VIDEO
Input is connected to
VIDEO: 1.
When an COMPONENT
VIDEO: Y-PB-PR Input
is connected to
VIDEO: 2.
(21) PICTURE-IN-PICTURE buttons
See separate section on page 25 for a description.
(22) PIP CH buttons
Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which
is highlighted indicates what channel is being controlled.