Filter
Top Products
21
THE GENIUS REMOTE CONTROL (CLU-572TSI)
In addition to controlling all the functions on your HITACHI Projection TV, the new remote is designed to
operate different types of VCRs, CATV (Cable TV) converters, satellite receivers, DVD players, and other
audio/video equipment with one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The
TV button will blink, indicating that the remote will now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The
VCR button will blink, indicating that the remote will now control your VCR. (See page 28 for
instructions on how to program the remote to control your VCR.)
To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE
(CBL) button. The CBL button will blink, indicating that the remote will now control your cable box. (See
page 29 for instructions on how to program the remote to control your cable box.)
To operate your satellite receiver, point the remote at the remote sensor of the satellite receiver and press
the SATELLITE (SAT) button. The SAT button will blink, indicating that the remote will now control
your satellite receiver. (See page 30 for instructions on how to program the remote to control your satellite
receiver.)
To operate your DVD player, point the remote at the remote sensor of the DVD player and press the DVD
button. The DVD button will blink, indicating that the remote will now control your DVD player. (See
page 31 for instructions on how to program the remote to control your DVD player.)
To operate additional audio/video equipment, point the remote at the remote sensor of the component and
press the AV1, AV2 or AV3 button. This button will blink, indicating that the remote will now control the
desired component. (See page 32 for instructions on how to program the remote to control additional
Audio/Video equipment.)
(1)These buttons allow the remote to control your TV,
VCR, cable box, satellite receiver, DVD player, or
other Audio/Video equipment depending on which
mode is chosen, as explained above.
(2), (3) LIGHT BUTTON
When you are in a dark room, press the light button (2)
on the side of the remote to light up the buttons shown
in (3) . The light will stay on for about 8 seconds if the
light button is not pressed again. These buttons will not
appear to light if the room is too bright.
(1) POWER Button
Press this button to turn the TV set on or off when the remote is in TV mode.
(2) TV button
When the TV button is pressed, it will blink, to indicate the remote is in TV mode.