Filter
Top Products
18
CONNECTING A S-VIDEO VCR OR STEREO LASERDISC
PLAYER
1. Connect the cable from the S-VIDEO OUT of the VCR OR laserdisc player to the INPUT (S-VIDEO)
jack, as shown on the TV set below.
2. Connect the cable from the AUDIO OUT R of the VCR or laserdisc player to the INPUT (AUDIO/R)
jack.
3. Connect the cable from the AUDIO OUT L of the VCR or laserdisc player to the INPUT (AUDIO/L)
jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon
disappears automatically after approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
Rear Panel of Television
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but not that a
VCR cannot record its own video or line output. (INPUT: 1 in example on page 13) Refer to your VCR
operating guide for more information on the input-output connections.