Hitachi 53FDX01B Projection Television User Manual


 
25
PICTURE-IN-PICTURE CONT.
SURF MODE PIP
This feature will automatically scan all active channel number (those set in memory) and display them as
PIP sub-pictures, along the right edge of the screen. Press the PIP button a second time to remove the sub-
pictures form the screen.
NOTES:
1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in
memory. (see pages 39 and 40)
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANT A is selected as the main channel.
4. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated.
(2) SWAP Button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
NOTES:
1. The SWAP button will only operate when SINGLE PIP mode or SPLIT PIP mode is chosen.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be
displayed as a sub-picture.
(3) PIP MODE button
To change between the three different PIP modes (SINGLE or SURF) press the PIP MODE button when
PIP is ON. Each press of this button will change PIP to a different mode. Pressing this button two times
will cycle through all three different PIP modes.
NOTES:
1. When main channel is COMPONENT: Y-PB-PR input viewing a PIP sub-picture is not allowed.
2. SURF mode PIP is only allowed when ANT A is the main picture.
(4) FREEZE button (With PIP ON)
If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write
down the address for a mail order company, recording statistics for a sporting event, etc. To return the
picture to motion, press the FREEZE button again.
NOTE:
The FREEZE function will only operate when SINGLE PIP mode is chosen.
(5) FREEZE button (With PIP OFF)
Press the FREEZE button to freeze the picture, depending on the mode selected (SINGLE or STROBE).
To change FREEZE modes, use the PIP MODE button to cycle through the three different modes.
SINGLE FREEZE
Press the FREEZE button to freeze the picture you are currently viewing. Press this button again or PIP to
return to normal viewing.