Hitachi 53FDX01B Projection Television User Manual


 
49
PARENTAL CONTROL
This function will block out the picture and sound of the selected channel or video input. It can be used to
keep the TV from being viewed for a scheduled amount of time that you set.
The code to enter PARENTAL CONTROL is a four digit secret code number. The factory preset code is
0000. Use the number buttons to select secret code.
Use THUMB STICK
or to highlight function and press down on the THUMB STICK to set ON or
OFF.
When CHANNEL is turned on, the picture and sound for the chosen channel will be blocked out.
When VIDEO LOCK is turned on, the picture and sound for all video inputs will be blocked out. To lock
the video inputs, you must be tuned to any video input.
When QUICK LOCK is turned on, the picture and sound for channels 3, 4 on both ANT A/B and all video
inputs will be blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the front panel will be deactivated, except the
POWER button.
When TV TIME OUT is turned on, you can set the BEGIN and END times and the TV cannot be viewed
during that time period.
(Set clock first). Use THUMB STICK
or to highlight ONCE (TV will time out one time only),
DAILY (TV will time out every day), WEEKLY (TV will time out one time a week) or OFF (to disable
this function) and then press down on THUMB STICK to SELECT your choice.
MOVIE RATINGS , TV RATINGS, and CANADIAN RATINGS are explained in detail in the Parental
Control Movie/TV Ratings Reference Guide.
To change the secret code number, select CHANGE SECRET CODE. Enter a new four digit dey number
you prefer.
If you forget your secret code, use the factory code 7777 to erase your key number. This will reset the key
number back to the factory preset 0000.
Press EXIT to quit menu or THUMB STICK
to return to the previous menu.
NOTE:
1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 38), when a channel is locked,
it is locked on both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 42).
3. When the RECALL button is pressed, text appears on the screen to indicate that CHILD LOCK is
activated.