Hitachi C43-FD7000 Projection Television User Manual


 
19
ON-SCREEN DISPLAY MENUǏTIMER MENUǐ
Timer Menu
The Timer function for this TV uses a countdown timer system. It features On Timer, Off Timer and Auto Off.
1 Press the MENU button to display the menu.
Press the Ÿź cursor buttons to select the Timer option as
shown on the right.
2 Press the ENTER button to enter the Timer menu as
shown on the right.
The adjustment items are shown below:
Off Timer
Example˖To turn off after 1 hour and 25 minutes.
Press the Ÿź cursor buttons to select the Off option. Press
number buttons to enter the specified amount of time (the
maximum time is 23:59), input the hour, then input the
minute, i.e.01:25 (shown on the right). Timer starts
countdown after quitting the Timer menu. After 1 hour and
25 minutes, the TV will go into standby mode.
Note: For sake of safety, after setting Off Timer, if the power is turned off or power supply is turned off accidentally before the set
time elapses, the TV will be in standby mode when you restart the TV.
On Timer
The setting of On Timer is similar to that of Off Timer. After On Timer is set, please turn off the TV by
pressing the button on the remote control unit to allow the TV entering countdown mode, when the power
indicator on the front of the TV will be blinking. This is normal. The power is turned on when the set time has
elapsed.
Notes: 1) If turning off the power using the POWER button on the front panel, On Timer will not work.
2) If the power is turned off by pressing the POWER button on the front panel before the set time is approaching or the power
supply is turned off accidentally, the TV will be in standby mode when you restart the TV.
3) If there is no operation for 2 hours after the power is turned on by the On Timer function, the power then turn off
automatically and the TV will be in standby mode.
Auto Off
If Auto Off set to On, when there is no more broadcasting transmission and no signal is detected, the TV will go
into standby mode automatically in 60 minutes. If Auto Off set to Off, it will cancel the function.
Notes: 1) Auto Off is only valid if no signal transmission is received from the antenna terminals.
2) Within 60 minutes after no signal is detected, switching TV to any channel with signal will cancel the Auto Off function.
3LFWXUH
$XGLR
7LPHU
)XQFWLRQ
6HWXS
6HOHFW6HW
Ź
7LPHU
2Q

2II

$XWR2II2Q
Set
6HOHFW
5HWXUQ
Ź
ź