Filter
Top Products
34
TV SCAN FUNCTION
ǏMode 12ǐ
Follow the steps on page 20 to enter the Function menu and
then select the TV Scan option as shown on the right.
Press the ŻŹ cursor buttons to set the TV Scan option to
mode 12, then quit the menu.
ƽIn normal TV mode, press the TV SCAN button to enter
mode 12(12-picture) as shown below.
The 12 pictures will rotate to refresh individual program
after a few seconds starting from the program No.0 except
for those skipped program. If the preset channels are less
than 12, it will display the actual number of searched
program. If the preset channels are more than 12, use the
Page up/down buttons to select the next group of
program.
ƽIn this mode, you can press the ŸźŻŹ cursor buttons
to select one of the pictures, and the program No. of the
selected picture will turn from white to green. Then, press
the ENTER button to quit, and the selected picture will fill
the entire TV screen.
ƽIn this mode, directly entering the program No. by using
the number buttons will quit this mode, then the selected
picture will fill the entire TV screen.
ƽIn this mode, no signal output from the speakers, the
headphone jack and the monitor out terminals.
ƽIn this mode, press the TV SCAN or the RETURN button to quit. If you enter the menu by pressing the
MENU button, it will quit this mode.
ƽIn this mode, the A/B, SWAP and POSITION buttons are invalid.
The Strobe function is shown as below.
Follow the steps on page20 to enter the Function menu, and select the Freeze option. Press the ŻŹ cursor
buttons to set the Freeze option to Strobe, then quit the menu.
ƽIn normal TV mode, press the FREEZE button to enter the mode 12 automatically. The 12
th
picture will display
the current moving picture. 11 continuous frozen pictures will display respectively in the other 11 pictures when
the FREEZE button is pressed. This function is not valid for all of input signal formats. When ʽNot
Available appears, it is invalid.
ƽIn this mode, you can quit by pressing the RETURN or the FREEZE button.
ƽIn this mode, you can enter the Audio menu to perform the adjustment, when you enter other menus such as the
Picture menu, it will quit this mode.
ƽAt this point, the monitor out terminals on the TV will output the video and audio signals from the current
moving picture.
ƽIn this mode, the A/B, SWAP and POSITION buttons are invalid.
䗝乍 Ϟϔ义䆒ᅮ
)XQFWLRQ
6FDQ0RGH
3URJUHVVLYH
'HFRUDWLYH/LJKW 2II
0XOWL3LFWXUH 6SOLW
796FDQ
)UHH]H
6WLOO
+36HOHFW $%
5HVHW
6HOHFW
6HW
5HWXUQ
ź
Ź