Filter
Top Products
27
TV SETUP OPERATION (continued)
Picture Setting
You can make specific adjustments for the picture based on your preference.
1. Press button.
2. Select “Picture” menu and press button.
3. Select the preferred menu item and press
button.
(By pressing ź button at the bottom of each menu page, the next Picture menu will appear on the screen.)
NOTE
Please see
32
about picture setting of PC
Page 1 Page 2!
Dynmaic
Cool
High
Reset
Picture
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Back Light
Reset
Select
OK
Set Return
+31
0
0
0
0
Picture
Black Enhancement
DNR
MPEG NR
Film Mode
3D Comb Filter
Picture Size
Reset
Select
OK
Set Return
Off
Off
Off
Off
Off
1
Reset
Selected Items Setup hint
Dynamic
Natural
Picture Mode
Cinema
You can make the better selection from 3 modes
Depending on the lighting condition and intended use.
Dynamic : Suitable for the brighter conditions.
Natural
: Suitable for the normal lighting condition.
Cinema
: Suitable for watching movie.
Contrast*
-31~+31
This adjusts the contrast to meet the lighting environment by using button.
Brightness*
-31~+31
With this function, black is adjusted to change the overall brightness by using
button.
Color*
-31~+31
It can adjust color density based on your preference by using button
Sharpness*
-15~+15
Preferred sharpness can be adjusted by pressing
button for softer image or button for sharper image.
Tint*
-31~+31
Pressing
button enhances red and weakens Yellow, while pressing
button weakens red and enhances Yellow.
The setup hint is adjusting for the realistic skin color.
This is not available by PC mode when receiving RGB signal.
Cool
Normal
Warm
Color
Temperature*
User
You can select from 3 settings (default): Cool, Normal, Warm depending on the
color condition with
buttons.
You can adjust the setting in “User” item.
High
Middle
Back Light
Low
Adjust the brightness of the Back Light for the maximum visibility.
Reset
Each item on this menu screen can be restored to the original factory settings by
pressing
button.
Information
The setting of the items indicated by “
*
” can be stored for each of inputs and picture modes (Dynamic/Natural/Cinema).
You can enjoy different setting depending on the selected input such as VCR in AV3.