Filter
Top Products
37
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Installing Channels
You can search available channels in any of the following 3 methods.
1. Press
button on the remote control in DTT mode.
2. Select “Installation”, on the DTT main menu with
buttons and press button.
3. The password is required to enter the Installation menu. The initial password is 0000.
4. You can select either of the followings by pressing
button.
x
Manual scan:
Searches by individual settings manually.
The box shown on the right appears. Fill out the following 4 items as needed.
Channel
num
Use buttons or numeric button to enter the number.
(Ch2-Ch69) *In case of tuning Ch9A, select Ch2
(Frequency: 205.5MHz.).
Frequency Use numeric button to enter the frequency.
Bandwidth
Select either 7MHz or 8MHz by using buttons. Set to
7MHz normally.
Priority
Select High or Low by using buttons. Set to High
normally.
Then, press button on “Start scan” of “Manual scan” column. If it finds a
channel, “Success” shows up. If not, “Timeout error” is displayed.
x
Quick scan:
Searches channels of the selected area.
The list of the area shows up. Select one of those with buttons and press
button.
NOTE
x If you are uncertain about the area, please select “Auto scan” method or contact
the local dealer in your area.
x
Auto scan:
Searches every channel.
The message “Auto scan will take more than 10 minutes. Do you want to
continue?”
Select “Yes” and press
button to precede it.
Restoring Channels
This restores the all channel settings.
1. Press
button on the remote control in DTT mode.
2
. Select
“Installation”
, on the DTT main menu with buttons and press button.
3
. The password is required to enter the Installation menu. The initial password is 0000.
4. Select “Restore default” and press button. The message “All setting
would be lost” appears. Select “Yes” and press button.
NOTE
x
The password will return to the default setting when activating “Restore
default”/
Installation
Manual scan
Quick scan
Auto scan
Restore default
Channel num 6
Frequency 177500KHz
Bandwidth 7 MHz
Priority High
Manual scan Start scan
Installation
Manual scan
Quick scan
Auto scan
Restore default
Adelaide
Brisbane
Melbourne
Perth
Sydney
Batchelor
Canberra
Darwin
Press Ÿźto select city.
Installation
Manual scan
Quick scan
Auto scan
Restore default
Auto scan will take more
than 10 minutes.
Do you want to continue?
Yes Exit
Installation
Manual scan
Quick scan
Auto scan
Restore default
All setting would be lost.
Yes Exit