Hitachi L26H01AU Flat Panel Television User Manual


 
46
TROUBLESHOOTING
Before calling service technician, check the following tables first. If the problem is not be solved with the suggested
procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message Condition / Action Page
Power Save
This indicates it is in Power Save mode. (in RGB mode)
The indicating lamp lights in orange.
45
No Sync. Signal
The unit cannot detect any signals from any input terminals.
Ɣ
Check if the cable is connected correctly and firmly.
Ɣ
Check if the power of the external equipment is ON.
Ɣ
Check if the input selection matches the connection terminal.
Ɣ
Check if the PC is in Power Save mode or not.
14
~
19
Auto Adjust
This indicates that it is in the process of auto adjusting.
(in PC input mode)
32
Invalid Mode
The unit receives unsupported signals.
Ɣ
Check if the cable is connected correctly and firmly.
Ɣ
Check if the input signal is compatible with the specification of the television.
49
,
51
52
Not Available
This shows when the selected operation is not available.
Weak signal
Bad or No signal
Database is Empty
Ɣ
Check aerial lead if it is disconnected/damaged/misaligned. (in DTT mode)
Ɣ
Check with your dealer if it is out of signal area or not. (in DTT mode)
Symptom and Check List
Symptoms Check list Page
No picture – no sound
Ɣ
Check the Indicating lamp status (Off, Red, Green, or Orange).
Ɣ
Check the connection of the Power Cord and/or other cables.
Ɣ
Check if the Main Power of the unit or external equipment is
ON.
Ɣ
Check if the TV mode is selected.
Ɣ
Check if the TV is in “Standby mode” or “Power Save mode”.
Ɣ
Adjust the values in “Picture menu” and “Audio menu”.
14
~
20
45
Snowy picture-poor sound
Ɣ
Check the aerial connection and direction.
Ɣ
The TV station may have broadcast difficulties.
Ɣ
Try another channel.
14
Multiple images-normal
sound
Ɣ
Check the aerial connection and direction.
Ɣ
Fine tuning the TV.
Ɣ
Check the connection of the external equipment.
Ɣ
The TV station may have broadcast difficulties. Try another
channel.
14
,
25
Intermittent interference
Ɣ
Check if the source of interference is shielded well.
Ɣ
Remove those kinds of electrical devices away from the TV.
Normal picture, but no
sound
Ɣ
Check the volume level.
Ɣ
Check if the button has been press or not.
Ɣ
Make sure that the headphone is NOT connected.
Ɣ
Check the connection of the external equipment.
15
~
17
20