ANTENNA/CABLE SYSTEM CONNECTIONS
18
(6) Connect the separator's coaxial end to the TV's VHF jack, and flat twin-lead end to
the TV's UHF terminal.
See Separate VHF/UHF Connection Diagram.
INDOOR VHF/UHF ANTENNA
(1) Disconnect the indoor UHF/VHF antenna cable from the back of your TV set.
(2) Reconnect the cable to the ANT.IN terminal of the VCR.
(3) Connect one end of the COAXIAL CABLE (supplied) to the ANT.OUT terminal of the
VCR.
(4) Connect the other end of the COAXIAL CABLE (supplied) to the antenna/cable jack
of your TV.
See Indoor Antenna Diagram.
NOTE: The connection of an indoor antenna to a VCR may not always give acceptable TV
Reception.
USING A/V JACKS WITH TV/MONITOR (OPTIONAL)
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO OUTPUT
jacks to the audio/video input jacks on back of your TV.
Direct audio/video connections usually result in a better picture and sound quality for
tape playback. Please see your TV's owner's manual for details.
Then, set your TV to the Video mode using VCR/TV button on your TV.
See A/V Jacks Diagram.
TO COPY A VIDEO TAPE