Hitachi VT-M290A VCR User Manual


 
SPECIAL FEATURES
56
Still Picture During Playback
If you press PAUSE button during playback, the picture will "freeze" on the screen. You
may use this feature to study details of a particular scene. Press PLAY button to
continue playback.
NOTE: The VCR will automatically switch to the Stop mode, if it is left in the Pause mode
for more than five minutes.
Tracking Adjustment - "DTR"
 Tracking adjustment will be set automatically (Digital Tracking function) when you
start playback. "DTR" appears on the display.
 When playing pre-recorded tapes or tapes recorded on units other than your own,
noise lines (black and white streaks) may appear on the playback picture. If this occurs,
adjust the Tracking control by pressing CHANNEL or button until the streaks
disappear. To return to the DTR function, stop the tape once and start playback again.
NOTE: This function is controlled only by the buttons on the VCR. This buttons on the
remote control will not adjust Tracking.
Slow Tracking
 You can reduce the noise lines by pressing CHANNEL
or button in slow mode
too. Slow Tracking adjustment will not be set automatically.
Note: Press both PLAY and PAUSE button at the same time in Still mode and press
CHANNEL or button on until the streaks disappear. To return to Still mode, press
Pause button.
This enables you to see the picture in its entirety without distracting noise lines.