Hitachi VT-M290A VCR User Manual


 
SETTING THE CLOCK
27
You must precede single-digit channel numbers with a zero (02,03,04 and so on).
5
Press ADD/DELETE button so that "ADD" flashes on the display. The channel is added
to the VCR.
 For next channel you wish to add, select that channel and follow step [5].
 If you press ADD/DELETE button again, the channel is deleted again.
6
Press MENU button. The TV screen returns to TV mode.
 To check the channel(s) that has been added, press CH or button.
SETTING THE CLOCK
Set the clock accurately for proper automatic timer recording. We suggest that you use
a TV or radio station as your time source.
 VCR Power must be on.
 Turn on the TV and set the TV channel to the same video output channel located on
the back of the VCR. (CH 3 or 4)
 Press VCR/TV button on the remote control so that "VCR" appears on the display.
 You must use remote control for this procedure.